DTSC-200 for ATS Controller
Woodward’s DTSC-200 is the ultimate control for new ATS (automatic transfer switch) builds and retrofits. A complete measurement and protection package, it easily configures to Utility-to-Generator, Generator-to-Generator, or Utility-to-Utility systems for open, delayed, or closed-transition transfer with synch-check to ensure the smoothest possible transfer.High-end features like transfer inhibit, source priority selection, load shed, motor load […]
DTSC-50 Digital Transfer Switch Controller for ATS
Woodward’s DTSC-50 digital transfer switch controller is an economical controller for open-transition (break before make) ATS (automatic transfer switch) control for emergency stand-by applications with a single generator. When the DTSC-50 detects a utility failure, it commands the generator to start and transfers the load to the emergency source. The DTSC-50 performs an open-transition re-transfer […]
TUG 4
Woodward’s TUG 4 Series temperature monitoring devices provide up to 16 PT100 RTD (resistance temperature detector) inputs for temperature measurement and monitoring. Two individually configurable trip levels can be programmed for each sensor input. If a measured temperature exceeds its configured trip levels, alarm and shutdown relays will energize accordingly. An additional relay is provided […]
UMT 1
Woodward’s UMT 1 Series consists of measuring transducers that feature true RMS sensing. Measured values are calculated and displayed on a two-line, 16-character LC Display. They can either be assigned to analog outputs (configurable as -20 to 20 mA, 0 to 20 mA, or 4 to 20 mA) or transmitted to a higher-level control system […]
SPM-D11 Series
The SPM-D11 Series are microprocessor-based synchronizers designed for use on one- or three-phase AC generators equipped with Woodward or other compatible speed controls and automatic voltage regulators. The SPM-D11 Series synchronizers provide automatic frequency, phase, and voltage matching, using either analog or discrete output bias signals. It combines synchronizing for one circuit breaker, load and […]
Lighting fixtures for fluorescent tubes
A terminal box in a light aluminum alloy can be supplied on request, version Ex de, to be mounted, by a sealed joint, in one of the threaded holes.The construction of the boxes always allows the version for I/O power
Lighting fixtures for fluorescent tubes with emergency
These equipment are suitable to be installed in places in which, during the normal activities, explosive atmosphere caused by gases, vapors, mists or caused by mixture of air and combustible dust are likely to occur. They type of protection flameproof “d”. They are ideal to ensure emergency lighting when the supply to normal lighting fails […]
LIGHTING POLES AND FASTENING ACCESSORIES
These support are used for the mounting of lighting fixtures in civil, commercial, industrial and public areas.
Lighting fixtures for fluorescent tubes with emergency
These equipment are suitable to be installed in places in which, during thenormal activities, explosive atmosphere caused by gases, vapours, mists orcaused by mixture of air and combustible dust are likely to occur.
Lighting fixtures for lamps without ballast
These equipment are suitable to be installed in places in which, during thenormal activities, explosive atmosphere caused by gases, vapours, mists orcaused by mixture of air and combustible dust are likely to occur.They type of protection flameproof “d”.They are normally used for uniform illumination of rooms and structures. Themain features of these lighting fixtures are […]
